DECK-O-SHIELD is a ready to use, water-based sealer/water repellent for natural stone, concrete, and masonry surfaces.
DECK-O-SHIELD is designed for use on waterfalls, as the product will limit the penetration of water into structurally sound, crack-free surfaces. The product can also be used on natural stone decks, walkways,
coping stones, or patios.
- Applies easily by brushing or spraying
- Ready to use
Surface appearance is virtually unchanged after application and complete drying
- Reduces entrapment of dirt particles and other contaminants that cause discoloration; inhibits soiling
Protects against efflorescence and rust staining
- Helps resist stains from spills
- VOC compliant
Protects against salt staining and “whitening” caused by salt in the water
Natural Stone**: 75 – 175 ft.2/gal. (1.8 – 4.2 m²/L)
Concrete: 100 – 175 ft.2/gal. (2.4 – 4.2 m²/L)
Masonry: 100 – 175 ft.2/gal. (2.4 – 4.2 m²/L)
Stucco Surfaces: 60 – 100 ft.2/gal. (1.4 – 2.4 m²/)
Concrete Block**: 50 – 100 ft.2/gal. (1.2 – 2.4 m²/L)**
*Always apply a test area to determine actual coverage rates. Coverage rates will vary greatly, due to the porosity of the substrate.
**Due to porosity, certain stone and block applications may require a significant increase in coverage rates – additional applications may be necessary.