Clicky

Brands

Categories

Home > Anchoring & Fastening Systems for Concrete and Masonry > Epoxy Adhesives > ET-HP

ET-HP is a two-component, high-solids epoxy system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle.

  • ET-HP has passed the demanding adverse-condition tests of ICC-ES AC308 pertaining to elevated temperature and long-term sustained load
  • Code-listed under the current IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3372
  • Code-listed under the current IBC/IRC for masonry per IAPMO UES ER-241
  • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete
  • Cure times: 24 hours at 80°F, 72 hours at 50°F
  • Easy hole-cleaning procedure – no power brushing required
  • Suitable for use in damp or wet anchor sites
  • When properly mixed, adhesive will be a uniform gray color
  • Available in 22 oz. and 56 oz. cartridges for application versatility
  • Made in the USA

USES / APPLICATIONS

  • Threaded rod and rebar doweling into concrete and masonry
  • Suitable for horizontal, vertical and overhead applications